TV Mounting

TV Mounting & Setup – Concealed Wire (up to 42″)

What We do:Sit down & go over what you want, & where it’s going. We may make recommendations that would allow for better performance such as viewing angle & sun glare.

We will unpack & mount your TV to the wall using your mount or one you purchase from us. Our Mounts are Contractor Grade, so not only are they heavier built & more adaptable to on site conditions, they are less expensive that the store bought alternatives.

In the interest of safety, we will examine your mount before using to see if it is suited to your TV and wall construction type. We will never install a TV on a bracket that we feel is not sturdy enough, or a wall that is not structurally sound enough to securely hold the weight. If this is determined to be the case, we can discuss alternative options or placement.

Install IN-WALL rated video & audio cords between your equipment & TV. The wires that come with your equipment can be used outside the wall, but not inside, due to fire code & insurance regulations. If you have purchased wire, we can use it as long as the designation CL-2 or higher is printed on the wire. Otherwise, we do carry the proper wires on the truck for purchase at less than store pricing.

Connect the TV power to the outlet on the wall behind the TV. TV power cords are not IN-WALL rated & can never be placed in the wall. We do have a IN-WALL rated unit called a power bridge that we can install. The cost for the unit & labor is $90. This is much less than having a electrician come & install a outlet.

Connect up to 5 video sources (like a HD cable/satellite box, BluRay/DVD player, Wii/Xbox, etc) to your TV.

Make sure that all the settings for that equipment are set to give the fullest  picture & sound to the TV.

Show you how to use all your stuff with the new TV. We will even go into the TV menu & label the inputs, turn off the ones you aren’t using & label your remotes. We will also email you a worksheet that lists your TV settings in case visitors start playing with the remote settings or the dog sits on the remote.

We will take pictures of the front & back of the equipment & put it in your file so that if you do have a problem, we can usually get you back up & running over the phone. This saves you the price and time of setting up a service call for something simple.

While we’re there we can also do a TV Calibration for a discount since we are already on site. Just click the link to find out more about this service.

Install Accessories

Have electric outlet behind TV mounting location

Need power bridge outlet relocate kit (parts & install)

Have INWALL/CL2 rated video/audio wires

TV is located directly above other AV equipment

Install Accessories

Need a certain type of bracket, tired of the basket of remotes? How about some cables that won’t break the bank?Tilt Mount

Swing Arm  & Double Swing Arm Mount

These mounts tend to sit close to the wall and allow up to 15 degrees of tilt up or down. Unlike a flush non tilt mount, these units allows enough room behind the TV for proper ventilation, non damage to cable plugs & connections, and allow for future accessibility to the connections on back of TV without removing the TV from the wall (a real back saver when hooking up that toy plus you don’t have to move all the equipment below the TV or worry about damaging existing wires & connections).

Like their Tilt Mount cousins,these mounts can  sit close to the wall and allow up to 15 degrees of tilt up or down. In addition they can swing out from the wall. The Single Arm Mounts extend approximately 4-7 inches, while some of the Double Arm Mounts can extend up to 26 inches. This allows TVs up to 40″ to end up at 90 degrees to a wall surface, perfect for swinging out from a wall and facing a bed or Sunroom, or even various equipment in an Exercise room.

Prices range from $99- $139 depending on TV size. These units are available for purchase during an install.

Prices range from $179- $249 depending on TV size. These units are available for purchase during an install.

Cables

HDMIAnalog Audio

Digital Audio

Prices range from $25- $60 depending on length. The cables are IN-WALL/CL2 rated. These units are available for purchase during an install.

Prices range from $22- $40 depending on length. The cables are IN-WALL/CL2 rated. These units are available for purchase during an install.

Prices range from $45- $99 depending on length.  The cables are IN-WALL/CL2 rated and certified to 10.2mbps. These units are available for purchase during an install.

IR Repeater System

Price is $129 installed. This unit allows equipment to be controlled via your remotes when not in sight, such as behind a closed cabinet door or even in another room. Standard distance between equipment is 9′ but can be extended to 50′ with the purchase of an extension cable. These units are available for purchase during an install.

Harmony Universal Remote

Preprogramed One Button Activities allow you to switch between watching TV, to watching a Movie, to Listening to Music. Usual setup price is between $150-$249 through the big box stores, plus the price of the remote. We feel that this is such a bonus to a Theater/TV setup that we have lowered our programing price to $75 if we are already onsite. No more basket of remotes or frantic calls from the spouse/kids at work on what to buttons to press to get the system running. It even has a help button to walk the user through what is wrong with simple yes/no questions.

These units are available for purchase during an install.

PS. To program the unit, High Speed Internet must be available & accessible, ie know your router password.

Harmony 650

$89.99 for Remote

plus Setup

Harmony 700

$99.99 for Remote

plus Setup

(rechargeable version & runs 6 pieces instead of 5)

Gadgets

TV Install and Setup Services

Contact us today to find out what our professionals can do for you with our AV and Home Theater Install Services.